GFS2 in Pacemaker (Debian/Ubuntu)

Setting up GFS2 in Pacemaker requires configuring the Pacemaker DLM, the Pacemaker GFS control daemon, and a GFS2 filesystem itself.

Prerequisites

• GFS2 with Pacemaker integration is supported on Debian (squeeze-backports and up) and Ubuntu (10.04 LTS and up). You'll need the dlm-pcmk, gfs2-tools, and gfs-pcmk packages.

• Fencing is imperative. Get a proper fencing/STONITH configuration set up and test it thoroughly.

Pacemaker configuration

The Pacemaker configuration, shown here in crm shell syntax, normally puts all the required resources into one cloned group. Have a look at this configuration snippet:

primitive p_dlm_controld ocf:pacemaker:controld \
  params daemon="dlm_controld.pcmk" \
  op start interval="0" timeout="90" \
  op stop interval="0" timeout="100" \
  op monitor interval="10"
primitive p_gfs_controld ocf:pacemaker:controld \
  params daemon="gfs_controld.pcmk"\
  op start interval="0" timeout="90" \
  op stop interval="0" timeout="100" \
  op monitor interval="10"
primitive p_fs_gfs2 ocf:heartbeat:Filesystem \
  params device="<your device path>" \
    directory="<your mount point>" \
    fstype="gfs2" \
  op monitor interval="10"
group g_gfs2 p_dlm_controld p_gfs_controld p_fs_gfs2
clone cl_gfs2 g_gfs2 \
  meta interleave="true"

Then when that's done, your filesystem should happily mount on all nodes.